Lexicon of silversmithing

Puiforcat silversmith
Craftsmen in the Puiforcat workshop pass on an array of techniques for which skill is equaled only by attention to detail. Essential gestures applied in the service of exceptional silverwork.


“Based on the design, I begin cutting the silver plate in desired dimensions. Then I choose a technique. For flatware, I stretch the metal over a curved surface and hammer it with mallets of all shapes and sizes in a circular pattern from the outside in. This is the planishing technique. For an oval-shaped piece, I place the metal on a head and hammer from the center outwards. This is the hammering technique.” Puiforcat is the last House in France to have preserved the savoir-faire of the planishing technique. Eric Popineau, the workshop’s master planisher, was awarded the prestigious title of Chevalier of the French Order of Arts and Letters.

Planishing ustensils
Planishing silversmith working on a sterling silver tray


Puiforcat repushing craftman

“To shape tumblers, ewers, coffee pots, etc., we use a spinning lathe. I place the silver plate on a wooden mandrel that turns horizontally and determines the curved form. I spin the material with a tool called a ‘spoon,’ to give shape to the object. Several passes are often needed for the piece to take on the desired form. Cold-worked silver can shrink, so forging is often necessary to soften the metal. This step is called ‘annealing.'"



“My job is to assemble the pieces. I put together the different parts of the object using ingenious mechanisms, signatures of the House. Puiforcat’s savoir-faire is unique in our ability to integrate cover hinges into the body of the piece, making them invisible. I also use the brazing technique to adorn the object with fixtures, moldings, knobs, spouts, hinges, feet or other embellishments.”

Puiforcat silversmith art
Puiforcat silversmith craftman


Puiforcat etching craftman

“Chasing involves decorating the metal piece without removing any material. First, I draw the motif on the piece using a tracing paper and place the object on a stable base. Then, I begin to print the motif by embossing the metal using small steel chisels called 'chasing tools.'"

Etching technique of silversmithing


“Etching is a form of decoration that cuts into the metal extracting thin shavings. Using a needle or bruin, I reproduce fine hatch marks, curves, dotted lines: a design, a number or a coat of arms. Any motif is achievable using different techniques. The ‘guilloché’ process, for example, adorns the metal surface with infinitely variable repetitive geometric designs and patterns, such as crosshatches, stary grid patterns, wavy lines or barley grain designs.”

Egg cup and napkin ring engraved in sterling silver
Engraving on a tumbler

Finishing stages

Puiforcat polishing craftman

The finishing stages reveal the true beauty of the silver by removing the marks left on the material during shaping and decorating. “Every unnecessary relief on the piece must disappear. I eliminate even the most microscopic irregularities using sanding brushes and buffing wheels before finishing with a soft flannel cloth. This is the buffing technique. Then I bring out the material’s luster and create a ‘mirror-polish’ finish using polishing brushes that give exceptional shine to the object.”